7 Appealing Traxxas Bandit Upgrades for Maximum Performance

With quicker speeds, innovative technology, hobby-grade durability, and a cheap price, the Traxxas Bandit brings RC fun to a whole new level.

The Bandit’s streamlined chassis keeps weight low for razor-sharp handling and blistering speed, whether on or off the road.

Even yet, for projects that are being upgraded for the first time, a few changes might have a significant influence on overall performance.

If you want to take your road trip to the next level, here are some fast and easy improvements to consider. At any time, you may put them to the test on your Bandit.

Upgrades and Costs At A glance

PartReason of UpgradeCost
Body Panel KitStronger body for RC$20-$50
Skins & WrapsProtects from outside harm$10-40
Motor & ESCProvides more speed$60-$135
WheelsBrakes are better$12-$220
Drivetrain & AxlesSteering is improved$45-$90
Suspension & ChassisAbsorbs shocks$100-$130
Tires & FoamsTurn rate is improved$12-$30

How Much Does It Cost to Upgrade?

The complete cost to upgrade and modify your Traxxas Bandit should be around $260-$700.

You’ll need about $20-$50 for body panel kits, $10-40 for skins & wraps, $60-$135 for motor & esc, $12-$220 per wheel, $45-$90 for drivetrain & axles, $100-$130 for shock kits & axles, $12-$30 for tires & foams.

7 Upgrades for the Traxxas Bandit:

You may modify and alter your Bandit’s components in a variety of ways to suit your preferences. Let’s take a look at seven of those incredible enhancements that might help you stand apart.

1. Body Panel Kits

The Pro-Graphix multi-colored painted body of the Traxxas Bandit is available in red, blue, black, and silver. It’s built of a fiber-composite monocoque with long-lasting components for a modern aesthetic.

There are no electronics, battery, or charger included in this panel. For ultimate DIY flexibility, add your motor, electronic speed control, servo, and radio system to the chassis.

The bundle will cost from $20 to $50 in total. Separate components will, on the other hand, be more expensive.

1st Option: TRA2417 Bandit Clear 1/10 Buggy Body (Traxxas), $20

2nd Option: TRA2448B Bandit Blue Body (Traxxas), $45

2. Skins & Wraps

Consider altering the skin or adding wraps to your Traxxas Bandit if you don’t like the way it looks.

The artworks are prints with a high resolution. A matte or high-gloss finish is available to the buyer.

You’ll need thin-profile rust sheet components if you want your rust sheet to be gap-free.

To get the most out of your Traxxas Bandit RC, please use Genuine Traxxas skins and wraps.

They can range in price from $10 to $40 depending on the design and color.

1st Option: TRA2448 Bandit Rock n’ Roll Paint w/ Decals, $20.

2nd Option:Traxxas 2433 Bandit, Pink (Paint, Decals), $30.

3. Motor & ESC

A strong Titan 12T 550 modified motor with an internal cooling fan and 12-turn motor limit come standard on the Traxxas Bandit.

With the waterproof XL-5, the electronic speed control is high-performance. It has two-stage low-voltage sensing and is compatible with iPo, NiCad, and NiMH batteries.

Because conventional motors wear out quickly, you’ll need to replace the ordinary motor with a more powerful motor to increase the speed and acceleration of your Traxxas Bandit car.

The power system motors for the Traxxas Bandit cost between $20 and $50, with an ESC costing between $40 and $85.

1st Option: Traxxas 3355R Velineon VXL-3s Electronic Speed Control, $55.

2nd Option: Traxxas Titan 550 Size Motor (12T), $26.

4. Wheels

Alias step-pin rear wheels from Traxxas Bandit come pre-glued on mirror-chrome five-spoke Tracers. The length of the wheelbase is 11.25 inches. The wheels are 2.2″ mirror chrome in the front and back.

The new all-terrain Traxx with Deep-Terrain Treads is the most essential traction upgrade you can make to the Bandit.

Upgrades to your wheel might cost anywhere between $12 and $25. A Traxx all-terrain vehicle will set you back at roughly $220.

1st Option: Traxxas 2475 Front Wheels, Bandit, $20.

2nd Option: Pro-Line Pomona Racing Wheels 12mm Hex (Black), $14.

5. Drivetrain and Axles

The Traxxas Bandit is equipped with a powerful Magnum 272 three-gear transmission with a sealed gearbox and ball bearings.

A planetary gear differential and telescopic U-joint driveshafts are included in the Revo-spec torque-control slipper clutch system.

To make the front axle and center driveshaft more robust and capable of withstanding intensive driving, aluminum should be utilized.

The axle will cost between $20 and $40, while the driveshaft will cost between $25 and $50. The user has the option of upgrading one or both of these.

1st Option: Exotek Slash 2WD Drag HD Steel CVD Axle Set, $35.

2nd Option: Traxxas Driveshafts, Rear, Steel-Spline Constant-Velocity, $30.

6. Suspension and Chassis

The Traxxas Bandit has a fiber-composite chassis that is firmly connected to the speed control and receiver.

It also contains white powder-coated shock springs and fully adjustable ultra-shocks with x-ring technology.

If you wish to modify them, aluminum suspensions cost between $30 and $60 while chassis kits cost between $40 and $70.

1st Option: Traxxas 5830 Low-CG Conversion Kit for 1/10 Scale, $39.

2nd Option: Traxxas TRA5862 Big Bore Aluminum Shocks, $55.

7. Tires and Foams

Alias 2.2″ step-pin rear tires and Alias 2.2″ ribbed front tires provide off-road grip for the Traxxas Bandit.

The step-pin rear tires on Bandit’s mirror-chrome five-spoke Tracer wheels are pre-glued.

You should also replace your ordinary tires and foams if you’re still using them. The tread on these tires wears very soon.

Tires and foams range in price from $12 to $30.

1st Option: Tires & Wheels, Assembled, Glued, $25.

2nd Optaion: Traxxas 5262 Air Filter and Foam Inserts, $15.

Traxxas Bandit Accessories Upgrades:

Long Arm Lift Kit & Canyon: Every trucker, whether full-size or RC, needs a lift and wider tires for his rig. The Traxxas Long Arm Lift Kit makes it easy.

To raise the chassis to accept 2.2″ tires, the kit includes longer GTS shocks and lengthened T-Lock cables. The cost varies between $150 and $190.

Brushless Digital Servo: The High-Torque 400 injects 400 ounce-inches of traction into the steering mechanism, equating to more than 20 pounds of force.

The 400’s housing contains an aluminum central portion that resists flex and keeps the internals cool, regardless of how hard you drive. It’s also resistant to water. It will set you back around $100.

LEDs: Traxxas provides a variety of super-bright, easy-to-install LED lighting systems for the TRX 4 cars. Each kit is custom-made to ensure a precise fit and a clean installation. The price is around $110.

Work Stand: As you work on your model, this strong RC work stand will give excellent support. It’s composed of high-impact polystyrene and comes with a rotating top plate for added convenience.

Rubber inserts protect the vehicle’s chassis by securely gripping it.

Link Wireless Module: The Traxxas TQi transmitter is a powerful, versatile, and adjustable tool for getting the most out of your model. It will set you back $40.


These changes are adequate to improve your vehicle’s overall speed, performance, control, and longevity.

It will surely outperform, endure longer, and be far more durable as a consequence of these enhancements.

To recap, if nearly everything is altered, the Traxxas Bandit may be customized to its most powerful condition.

Related Posts:

Recent Posts